If you’re like most people, your morning routine starts with a hot shower. Whether you’re using a traditional shower head or a steam shower, setting the clock on your Kohler steam shower is a breeze. To do this, just press the lever located on the side of the shower head and rotate it to set the time. You can also set the clock by snapping a photo and sharing it on social media. No more struggling to figure out how to time a traditional shower! With Kohler’s easy-to-use clock, everything is at your fingertips.
How to Set the Clock on a Kohler Steam Shower
It can be frustrating to waste time trying to figure out how to set the clock on a Kohler steam shower.
There are several ways to accomplish this task, depending on the type of clock you have.
If you have a digital clock with a number pad, follow these steps:
1. Press and hold the “12” button for two seconds until the hour indicator flashes.
2. Use the number keys to enter the desired time. The “00” button will exit the time setting mode and return you to the main menu.
3. Press and release the “12” button to save your settings.
4. If you have a traditional analog clock, press and hold both buttons at once until the hour and minute hands start moving together (approximately six seconds). The hours will flash while the minute hand remains stationary; use the numbers on the dial to enter minutes (00-59). To exit, release both buttons at once or press and hold one button for two seconds until minutes start flashing (00-59).
Troubleshooting a Clock that Won’t Set
If your clock won’t set, there are a few things you can do to try and fix the issue. First, check that the clock is plugged in and properly connected to the wall outlet. If it’s not, the clock may not be getting power. Second, make sure that the batteries are fresh. Third, check if there is any obstruction between the clock movement and the wall outlet. If there is, remove any obstructions. Finally, if all else fails, you can try resetting the clock by pressing and holding down both buttons for about 10 seconds.
Tips for Cleaning a Kohler Steam Shower
If your Kohler steam shower does not have a built-in clock, you can set the time by following these steps: Open the shower door. Look for a small button on the inside of the door near the handle. Push down on this button to lower the blinds. Look for a round plastic hole on the wall just above and to one side of the hand held shower head. This hole is covered with a small sticker that has a number on it – say “1”. The number should be oriented so that when you see it in daylight, it is facing upwards. Gently peel off this sticker and put it in your pocket or somewhere safe so you can remember where it is when you need to reset the clock later. Turn on the water supply by turning the knob at the top of the shower until you hear a loud click. Look for another small button (usually red) next to this knob and push it in until you hear another click. This will activate the timer which will start counting down from 60 seconds. To reset or change the time, turn off both water supplies by pushing their respective buttons again and then replace/put back on sticker as described above. When changing or resetting your time, make sure all other devices in your home are turned off or unplugged before doing so (the timer may not work if other electronics are plugged into it).
Conclusion
When it comes to setting the clock on a Kohler steam shower, there are a few different options available. Depending on how you want to set the time, you can use one of two methods: using the digital display or by using the manual mode. In this article, we will show you how to use both methods and help you choose which one is best for you.
