Home » Walk-in Shower » How To Keep Water Off Floor For Walk In Shower

How To Keep Water Off Floor For Walk In Shower

No one likes a wet bathroom floor. It’s slippery, dangerous, and can lead to accidents. But if you have a walk in shower, it’s almost impossible to avoid. Water will always find its way onto the floor no matter how much you try to prevent it. But there are some things you can do to keep your bathroom floor dryer for longer. In this blog post, we’ll explore how to keep water off floor for walk in shower so that you can minimize the risk of slips and falls.

The Best Way to Keep Water Off Your Floor

If you’re looking for ways to keep water off your floor for a walk in shower, one of the best things you can do is install a water guard or similar product. This will help to prevent water from seeping through cracks and onto your floor. Another option is to use a squeegee after each shower to remove any excess water. You can also place a bath mat or rug in front of the door to help absorb any wet footprints.

Different Types of Water-Repellent Coatings

There are different types of water-repellent coatings that can be used to keep water off the floor in a walk-in shower. The type of coating that you choose will depend on the material of the shower floor and the amount of water that is expected to be on the floor.

Water-repellent coatings can be applied to shower floors made from tile, stone, concrete, or fiberglass. They work by creating a barrier between the surface and water, which prevents the water from seeping into the surface. These coatings can be clear or tinted, and they can be applied with a brush, roller, or sprayer.

Water-repellent sealers are typically used on porous surfaces such as brick, mortar, grout, and concrete. They Penetrate into the surface to create a waterproof barrier that prevents water from seeping in. These sealers can be clear or tinted, and they typically need to be reapplied every few years.

Silicone-based waterproofing membranes are often used on shower floors made from fiberglass or tile. They are applied as a liquid and then cure to form a flexible membrane that is impervious to water. Silicone waterproofing membranes can last for many years without needing to be reapplied.

See also  Does Medicare Help Pay For Walk In Shower

How to Apply the Water-Repellent Coating

If you have a walk in shower, you know that keeping water off the floor is key to preventing slips and falls. A water-repellent coating can help to keep the floor dry and safe. Here’s how to apply a water-repellent coating to your shower floor:

1. Start by cleaning the floor with a mild soap and water solution. Be sure to rinse the floor well and allow it to dry completely before proceeding.

2. Next, apply a layer of the water-repellent coating to the shower floor using a brush or roller. Be sure to evenly cover the entire surface.

3. Allow the coating to dry for at least 24 hours before using the shower. Once dry, the coating will help to repel water and keep the floor dry.

Conclusion

There you have it! Our top tips on how to keep water off the floor for walk in showers. By following these simple tips, you can rest assured that your shower will be both safe and stylish. So, what are you waiting for? Get started today and enjoy your new, water-free bathroom!