Home » Steam Shower

How To Install Thermasol Steam Shower: A Step-by-Step Guide for 2023

If you’re looking for a refreshing shower that will leave you feeling invigorated, look no further than a Thermasol steam shower. These showers use steam to penetrate the skin, which results in extreme temperature changes that help loosen up the dirt and debris embedded in your pores. In this blog post, we will walk you through the steps necessary to install a Thermasol steam shower. We’ll also provide tips on how to make the most of your experience and get the most out of your showering experience.

What is a Thermasol Steam Shower?

A thermasol steam shower is a hot, humid shower that uses pressurized steam to heat the water. The steam produces a hot mist that helps to soften and moisturize the skin. This type of shower is perfect for people who want to add some extra warmth and moisture to their daily routine.

To install a thermasol steam shower, you will need the following supplies:

-An existing water supply line or hose
-A thermasol unit
-A faucet with a spray head
-Screws or nails for attaching the thermasol unit to the wall or ceiling
-Tubing for attaching the faucet to the wall or ceiling
-Cordless drill with 1/4″ bit and screwdriver
-Rags or paper towels

How Does a Thermasol Steam Shower Work?

Thermasol steam showers are a popular choice for people who want to get a good wash without having to use hot water. These showers heat up water in the tank using steam and then send this heated water through the shower head. This results in a hot, moist shower that is perfect for washing away sweat and dirt.

To use a thermasol steam shower, you will first need to fill the tank with water. You can either use hot water from the tap or pre-heated water from the boiler. Then, add the required amount of Thermasol steam to the tank. For safety reasons, it is always best to use cold water before adding any steam.

Once the tank is full of steam, turn on the shower and wait until it has warmed up fully before entering the shower area. Be sure to wear protective clothing, such as gloves and a hat, when using a thermasol steam shower because of the high temperature of the water.

The great thing about thermosols is that they require very little maintenance. Simply rinse out the tanks every few months and replace any parts that become worn down over time.

What Are The Advantages of Having a Thermasol Steam Shower?

Thermasol steam showers provide a refreshing and invigorating experience that is perfect for people who are looking to get their daily dose of exercise. Thermasol showers use water at a high temperature to create a vaporized mist, which then disperses over the surface of the water to be absorbed by the skin. The vaporized water then creates a cooling sensation, which helps to relax muscles and soothe the skin. These showers also have other benefits such as reducing stress levels and improving circulation.

How to Install a Thermasol Steam Shower Yourself

The thermosol steam shower is a great way to enjoy the benefits of a hot shower without having to wait for it to heat up. This shower system uses pressurized water and steam to create a hot, relaxing experience that can be enjoyed anywhere there is an outlet.

To install a thermosol steam shower, you will need the following supplies:
-A thermosol steam shower system
-An electrical outlet
-An extension cord
-A wrench
-A drill with medium bit size
-1/2 inch hex key tool
-Tape measure or straight edge
-Paint or sealant (optional)
-Drill screws (not included)
The first step is to remove the old shower valve. On most models, this will only take a few minutes with a wrench. Next, unscrew the water supply line from the faucet. Disconnect the drain line if there is one. Now you will have two lines: one for hot water and one for steam. Mark where they both go by drawing a line on the wall where they were removed. You may also want to paint or seal this area so it doesn’t get wet again. It’s now time to install your new thermosol steam shower system! First, mark where the pipes will go using tape measure or an straight edge. Take your drill and drill pilot holes for each pipe according to your markings. Make sure you use a 1


If you’re in the market for a new shower, one of the options that might be on your list is thermasol steam. Installing a thermasol steam shower can be a fun and easy experience, and it can also offer some great benefits for your home. If you’re looking to try out this type of shower system, read our guide to installing a thermasol steam shower to learn all about what you need to know before getting started.

Samantha Allen

Samantha Allen

Samantha Allen is an authority on high-end spa treatments and steam showers. Through her blog, she provides insight and guidance into home improvement, deluxe spas, and steam showers. She offers comprehensive instructions for those wishing to maximize their at-home spa experience. Samantha has devoted countless hours to researching and evaluating various steam shower models to determine the finest ones available. Moreover, she is a practiced DIYer who has created video tutorials on a variety of topics related to home renovation and luxurious spa activities.