Home » Walk-in Shower » How To Fit A Walk In Shower Tray

How To Fit A Walk In Shower Tray

A walk in shower tray can be a great feature in any bathroom. They are stylish, practical and come in a variety of shapes and sizes to suit any space. But, before you go ahead and install one, it’s important to make sure you know how to fit a walk in shower tray correctly. In this blog post, we will show you how to fit a walk in shower tray step by step, so that you can enjoy all the benefits of your new shower with peace of mind. From measuring your space to choosing the right tray for your needs, we’ve got you covered.

What is a walk-in shower tray?

A walk-in shower tray is a type of shower base that is designed to be installed flush with the floor, creating a barrier-free entry into the shower. Walk-in shower trays are available in a variety of materials, including acrylic, stone, and ceramic.

How to measure for a walk-in shower tray

When measuring for a walk-in shower tray, you will need to consider the size of the space you have available, as well as the type of shower you are looking to install.

There are a few different types of walk-in showers, including corner showers, alcove showers, and freestanding showers. The type of shower you choose will impact the size of the shower tray you need.

Corner showers typically require a smaller shower tray than alcove or freestanding showers. Alcove showers can accommodate a variety of different sizes, but may require a custom-sized shower tray for an optimal fit. Freestanding showers usually require the largest shower trays.

Once you have considered the type of shower you would like to install, you will need to measure the space where the shower will be installed. Be sure to measure both the width and depth of the space to ensure that your chosen walk-in shower tray will fit comfortably.

When selecting a walk-in shower tray, be sure to keep in mind that it needs to drain properly in order to avoid leaks. Most walk-in shower trays come with a built-in waste outlet that connects to your home’s drainage system. However, some models may require an external drain kit (sold separately) for proper drainage.

Once you have considered all of these factors, you should be able to select the perfect walk-in shower tray for your space!

See also  Does A Walk In Shower Increase Home Value

The different types of walk-in shower trays

There are two main types of walk-in shower trays: the square tray and the rectangle tray. The square tray is the most popular type of walk-in shower tray as it is the easiest to install and provides a good amount of space for showering. The rectangle tray is also a popular option as it provides more space than the square tray, but can be more difficult to install.

How to install a walk-in shower tray

If you’re thinking of installing a walk-in shower, you’ll need a shower tray. This guide will show you how to install a walk-in shower tray in four easy steps.

1. First, mark out the position of the tray on the floor using a pencil and tape measure. The tray should be positioned so that it’s level with the top of the floor tiles.

2. Next, cut out the hole for the tray using a hole saw or jigsaw. Be sure to wear eye protection when doing this.

3. Once the hole is cut out, place the shower tray into position and secure it to the floor with screws or adhesive pads (depending on what type of flooring you have).

4. Finally, seal around the edge of the tray with silicone sealant to stop water from leaking out. Allow the sealant to dry completely before using the shower.

Conclusion

There you have it, everything you need to know about how to fit a walk in shower tray. Hopefully this guide has been helpful and informative, and will give you the confidence to go out and get started on your very own shower project. Don’t forget, if you need any more help or advice, our team of experts are always on hand to help.

See also  How To Install A Walk In Shower Kit