Home » Walk-in Shower » How To Change A Bathtub To Walk In Shower

How To Change A Bathtub To Walk In Shower

For many of us, our bathtub is one of the most relaxing places in our home. It’s a place where we can soak away our troubles and relax. However, as we get older, they can become increasingly difficult to get in and out of. If you’re finding that your bathtub is no longer meeting your needs, it may be time to consider changing it to a walk-in shower. In this blog post, we’ll show you how to change a bathtub to a walk-in shower, step by step. We’ll also give you some tips on choosing the right shower for your needs.

Demolition

Some homeowners opt to remove their bathtub and replace it with a walk-in shower. While this may seem like a daunting task, it is actually not as difficult as you might think. With a few tools and some elbow grease, you can easily convert your bathtub into a walk-in shower.

The first step is to remove the tub. This can be done by unscrewing the bolts that hold it in place and then lifting it out of the room. You may need help from another person to do this, as tubs can be quite heavy. Once the tub is removed, you will need to remove the tile around the tub area. This can be done with a chisel and hammer. Be sure to wear safety goggles when doing this to protect your eyes from flying debris.

After the tile is removed, you will need to install backer board around the perimeter of the shower area. This will provide a surface for the new shower walls to be installed on. Once the backer board is in place, you can begin installing the new shower walls. These can be made of tile, stone, or any other material you desire. Be sure to seal all joints with waterproof caulk to prevent leaks.

Once the shower walls are in place, you will need to install a drain in the floor of the shower area. This can be done by cutting a hole in the floor and attaching the drain assembly according to manufacturer’s instructions. Finally, you will

See also  Bathroom Tile Ideas Walk In Shower

Installing the Barrier

If your bathroom is in dire need of a makeover, but you don’t have the time or money for a complete renovation, then consider changing your bathtub to a walk-in shower. It’s a relatively easy and inexpensive way to update your space, and it can make a big difference in the overall look and feel of your bathroom.

To install a barrier around your new walk-in shower, start by measuring the space. You’ll need to purchase enough material to cover the entire perimeter of the shower, plus an additional 3-4 feet for overlap. Once you have your materials, cut them to size and attach them to the wall using screws or nails. Start at one corner and work your way around until the entire area is enclosed.

Make sure that the barrier is securely attached and there are no gaps or openings where water could escape. Once you’re satisfied with the installation, apply caulking around the edges of the barrier to further seal it off. Allow the caulking to dry completely before using the shower.

Adding the Curb and Shower Pan

When it comes time to install the new shower pan, you will first want to add a layer of mortar to the bottom of the pan. This will help the pan adhere to the curb and prevent any water from seeping through. Once the mortar has been added, set the pan in place and use a level to make sure it is even.

Next, you will need to install the curb. Start by adding a layer of mortar to the top of the shower pan. Then, set the first piece of curb in place and use a level to make sure it is even. Repeat this process until all pieces of curb have been installed.

Finally, you will need to add caulk around the perimeter of the shower pan and where the shower door will be installed. Once everything is in place, let the caulk dry for 24 hours before using your new walk-in shower!

See also  Is It Cheaper To Replace A Bathtub With A Shower

Finishing Touches

When it comes to giving your bathroom a makeover, don’t forget the finishing touches! Here are some tips on how to change a bathtub to walk in shower:

1. Remove the tub and any surrounding walls.

2. Install a waterproof barrier and drain in the shower area.

3. Add tile or another waterproof material to the floor and walls of the shower area.

4. Install a shower door or curtain.

5. Hang up some new towels and add some decorative touches, like plants or candles.

Conclusion

There you have it — a few tips on how to change your bathtub into a walk-in shower. This can be a great project for any home improvement enthusiast, and it can really add value to your property. If you’re not sure whether this is the right project for you, consider hiring a professional to do it for you. They will be able to help you with all the details and ensure that the job is done right.