Home » Walk-in Shower » How To Build A Walk In Shower Without A Curb

How To Build A Walk In Shower Without A Curb

A walk in shower is one of the most sought-after features in a bathroom. They’re sleek, stylish, and open up the space, making the room feel bigger. But what if you don’t have a curb to build one? You might be wondering how to build a walk in shower without a curb. The answer is actually quite simple: by using a preformed pan. Preformed pans are made of PVC or another type of waterproof material and can be customized to fit your space. In this blog post, we will show you how to build a walk in shower without a curb using a preformed pan. We will also provide some tips on choosing the right pan for your space and give you some ideas for customizing it to fit your style.

What You Will Need

-Tape measure
-Level
-Screwdriver
-Drill
-1/8 inch drill bit
-Cordless circular saw
-Safety goggles
-Ear protection
-Dust mask
-Knee pads
-Measuring cup
-Stirring stick
-Sponge

Step One: Build The Shower Floor

If you’re planning on building a walk in shower, the first step is to build the shower floor. This can be done by using a variety of materials, but the most common material used is concrete.

When building the shower floor, it’s important to make sure that the slope is correct so that water will drain properly. The slope should be about 1/4 inch per foot. Once the slope is correct, you can then add a layer of waterproofing material.

After the waterproofing material is in place, you can then add a layer of mortar and then tile. Make sure that the tiles are installed properly so that they don’t crack or come loose over time.

See also  How To Create A Walk In Shower

Step Two: Install The Shower Walls

Assuming you have your subflooring installed and leveled, you’re ready to start working on the shower walls. In order to keep water from seeping behind your wall panels and causing mold or other damage, you need to create a waterproof barrier. We recommend using an acrylic liner for this purpose.

Once you have your liner in place, it’s time to install the wall panels. If you’re using tile, apply mortar to the back of each one before setting it in place. For prefabricated panels, simply follow the manufacturer’s instructions. For either type of wall panel, be sure to use waterproof caulk or grout around the edges where they meet the floor and ceiling.

Step Three: Install The Shower Door

Assuming you have a preformed shower base, the next step is to install the shower door. If you are using a frameless shower door, first put silicone sealant on the top and bottom of the door opening. Then, set the door in place and use a level to make sure it is even. Once it is level, use silicone sealant to attach the door to the wall at the top and bottom.

For a framed shower door, first attach the hinges to the door according to the manufacturer’s instructions. Then, fit the door into the opening and use a level to make sure it is even. Use shims if necessary to make it level. Once it is level, use screws to attach the hinges to the wall studs.

Conclusion

Building a walk in shower without a curb is not as difficult as it may seem. With the right tools and materials, you can easily build a shower that will be both functional and stylish. We hope that our tips have helped you figure out how to build your own walk in shower without a curb and shown you just how easy it can be. If you need help finding the right tools or materials, check out our selection of products and find everything you need to get started on your project.

See also  How To Tile Walk In Shower Floor