A walk in shower is a great addition to any bathroom. Not only does it add value to your home, but it also makes your bathroom more functional and stylish. If you have concrete floors in your bathroom, you may be wondering how to build a walk in shower on concrete. Fortunately, it is possible to build a walk in shower on concrete. In this blog post, we will show you how to build a walk in shower on concrete, step by step. We will also provide some tips and tricks for getting the most out of your new shower.
What is a walk in shower?
A walk in shower is a type of shower enclosure that does not have a door or curtain, and generally has a low threshold to make it easy to walk into. Walk in showers can be installed in both new construction and existing homes. When planning for a walk in shower, it is important to consider the layout of the space, as well as the type and size of the shower base.
The benefits of having a walk in shower
If you’re lucky enough to have a large bathroom, you may want to consider installing a walk in shower. Not only are they more aesthetically pleasing than a traditional shower/tub combo, but they can also offer a number of benefits. Here are just a few:
More space: Because walk in showers don’t require a tub, they open up the bathroom and make it feel larger. This is especially helpful if you have a small bathroom.
Easier to clean: Without all the nooks and crannies that come with a tub, walk in showers are much easier to keep clean. A quick wipe down after each use is usually all that’s needed.
Safety: Walk in showers can be safer than traditional showers, since there’s no need to step over a high tub wall. This is particularly beneficial for seniors or those with mobility issues.
Increased resale value: Homes with walk in showers tend to sell for more than those without them, so if you’re ever planning on selling your home, it’s worth considering installing one.
How to build a walk in shower on concrete
A walk-in shower is a great addition to any home, and if you have concrete floors in your bathroom, you may be wondering how to build a walk-in shower on concrete. The good news is that it’s not as difficult as you might think!
First, you’ll need to determine the size and location of your shower. Once you’ve done that, mark out the perimeter of the shower with tape or chalk. Then, use a drill to make holes around the perimeter of the shower (this is where your drain will go).
Next, apply a layer of waterproofing membrane to the concrete floor inside the perimeter of the shower. Then, install a pre-fabricated shower pan (this will be your base) and connect it to your drain.
Once the base is installed, you can begin tiling the walls of your shower. Start at the bottom and work your way up, using waterproof grout between each tile. When you reach the top of the shower, install a waterproof sealant around the perimeter to ensure no water leaks out.
Finally, add any finishing touches like shampoo shelves or towel hooks, and voila! You now have a beautiful new walk-in shower made entirely of concrete.
What materials are needed to build a walk in shower on concrete?
If you’re planning on building a walk in shower on concrete, you’ll need to gather the following materials:
-A shower base or pan (available at most home improvement stores)
-Shower walls (available at most home improvement stores)
-Tile (available at most home improvement stores)
-Grout (available at most home improvement stores)
-Silicone caulk (available at most home improvement stores)
-A drill
-1/4 inch masonry bit
-3/8 inch masonry bit
-Tape measure
-Level
-Pencil
-Circular saw
Walk in shower designs
There are many different ways that you can build a walk in shower on concrete. The most important thing is to make sure that the floor is level and the walls are sealed so that water does not leak out.
One way to build a walk in shower on concrete is to use a prefabricated shower base. This type of base comes in many different sizes and shapes, so you should be able to find one that fits your space well. You will need to seal the edges of the base with caulk before setting it in place.
Another option for building a walk in shower on concrete is to create a custom shower pan. This can be done by using a sheet of waterproof liner material and creating a slope so that water drains properly. You will need to add drain holes and then seal the edges with caulk or grout.
If you want a more permanent solution, you can install tile onto the concrete surface. This will require some additional work, but it will provide you with a beautiful and durable finish. You will need to apply mortar to the back of each tile and then set them into place. Once the tile has dried, you can grout the joints and enjoy your new shower space!
Conclusion
Building a walk in shower on concrete is not as difficult as it may seem. With the right tools and materials, you can easily build a shower that will last for years to come. Be sure to follow these tips so that your shower turns out looking great and functions properly. Do you have any tips for building a walk in shower on concrete? Let us know in the comments below!